Jinxed worx

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.The Model is 200x150mm in sizeDon't alter the z axis, but x and y SHOULD be ok.The Max Depth is 2.2mm and the Actual Depth is 1.9mmFilaments Used: PLA BambuLab Matte Black Transmission Distance: 0.5 PLA+ Sunlu Fuschia Transmission Distance: 5 PLA BambuLab Matte Blue Transmission Distance: 0.5 PLA+ Sunlu Pure Yellow Transmission Distance: 5 PLA BambuLab Matte White Transmission Distance: 0.5\ Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Fuschia At layer #9 (0.8mm) swap to Marine Blue At layer #11 (0.96mm) swap to Pure Yellow At layer #12 (1.04mm) swap to White for the rest. (if using AMS, then just swap out the black with the white after layer 7 during print (as the file is downloaded to the printer from BambuStudio already the printer will just carry on as printing the white if it was black if swapped at the right time, so remember to swap out after the first black layers are complete