John Stewart Hueforge

Project: John Stwart.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm #080a0d PLA PolyLite Black Transmission Distance: 0.3 #0056b8 PLA BambuLab Basic Cobalt Blue Transmission Distance: 1.2 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #e2dedb PLA PolyLite White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue At layer #13 (1.12mm) swap to Red At layer #17 (1.44mm) swap to Black At layer #21 (1.76mm) swap to White for the rest.