John Wick Blue Hueforge

If you would like to thank me or support me with a one-time donation, or if you are interested in selling physical prints of my models, check out: https://buymeacoffee.com/heyben John Wick Blue Hueforge Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may prinYou may print at higher layer heights below the Base Thickness of 1.12mmThe Max allowed Thickness is 4.32mm and the Actual Thickness is 2.64mm Filaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.2 #041b3d PLA PolyLite Dark Blue Transmission Distance: 0.1 #114b62 PLA Chrominal Deep Sea Blue Transmission Distance: 4.8 #ddd7c7 PLA+ Esun Bone White Transmission Distance: 4.9This print uses 4 unique filaments ***attached .3mf file prints the first 4 layers at 0.25mm then the rest at 0.04mm for faster print time******the layer numbers will be different but the layer height will be the same*** Swap Instructions: Start with Black At layer #4 (1.24mm) swap