John Wick

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 170.01x95.63mm in sizeYou may print at higher layer heights below the Min Depth of 0.56mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA smartfil negro Transmission Distance: 0.4 PLA smartfil gris Transmission Distance: 0.8 PLA smatfil White Transmission Distance: 6This print uses 3 unique filamentsSwap Instructions: Start with negro At layer #16 (1.36mm) swap to gris At layer #22 (