Johnny 5 Hueforge

I have not enabled a pause as I do in my other Hueforges .You will have to change the last color when red finishes (after the first 2 hours ) in AMS or enable a pause . Have Fun! Project: Johnny 51.hfpPrint at 100% infill with a layer height of 0.04mm with a base layer of 0.12mmThe Model is 187.75x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.6mmThe Max Depth is 2.5mm and the Actual Depth is 2.5mmFilaments Used: PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Black Transmission Distance: 0.3 PLA BambuLab Basic White Transmission Distance: 5 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab basic Ice Blue Transmission Distance: 3.5This print uses 5 unique filamentsSwap Instructions: Start with Red At layer #14 (0.64mm) swap to Black At layer #19 (0.84mm) swap to White At layer #32 (1.36mm) swap to Blue Gray At layer #41 (1.72mm) swap to Black At layer #51 (2.12mm) swap to Ice Blue for the rest.