Joined Shelves

This is a multi-part print. Printing the outer shelves results in a 320mm wide by 160mm tall by 160mm deep standing shelf. These are printed as 2 units (160mm wide each) that each fit on an A1 mini plate and are joined together after printing. There is also an optional middle shelf (also 160mm tall by 160mm deep and 160mm wide) as a separate print profile that can be printed and slotted in between the 2 outer shelves. You could print as many middle shelves as needed to chain more of them together. These are designed to only be used with the 2 outer shelves on either side because of the joining mechanism, which would be visible if you tried to use it as a standalone shelf. The legs are 30mm by 10mm for extra stability. You'll note that one set of legs is set 30mm from the edge of the shelf. This is to allow for either obstructions on the wall side or to be able to place it on a smaller shelf with a slight overhang to the front. The joint is a bit loose to make sure that it can be jo