Thingiverse
Joint case
por nekrologic
319
Descargas
365
Likes
2
Makes
A simple joint holder made for a friend, quick and easy design without fancy features.
Printed without supports at 0.16 mm layer height just because of threads.
Inflll: Use 10% for the cap and 100% for the body.
If you believe that it won't stick to your bed use brim to provide a better contact surface.
Printed at 205°C (bed temp: 60°C)
Print it oriented as in Figure "Print", not as shown in the .STL files
Printed without supports at 0.16 mm layer height just because of threads.
Inflll: Use 10% for the cap and 100% for the body.
If you believe that it won't stick to your bed use brim to provide a better contact surface.
Printed at 205°C (bed temp: 60°C)
Print it oriented as in Figure "Print", not as shown in the .STL files
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
