Cults3D
Art
Voir le modèle
Jointed Astronaut
0
Téléchargements
2
Likes
0
Makes
This is astronaut model that requires manual assembly, capable of limited articulation after assembly.
-------------
Print Settings
Layer height:0.2mm
speed:200mm/s
Need support
5% infill , 3 walls
Print Time : ~5 hours
Recommended to use PETG for printing.
If the joints are too loose or too tight, please adjust the X-Y contour compensation by approximately ±0.05
-------------
Print Settings
Layer height:0.2mm
speed:200mm/s
Need support
5% infill , 3 walls
Print Time : ~5 hours
Recommended to use PETG for printing.
If the joints are too loose or too tight, please adjust the X-Y contour compensation by approximately ±0.05
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
