Thingiverse
Jointed Triceratops
por Robot3dart
25
Descargas
93
Likes
0
Makes
This is a Triceratops model consisting of 9 parts, capable of limited articulation after assembly.
The leg joints are printed as a single piece, with a 0.2 mm gap reserved for movement. If the joints cannot move, it means the dimensions are inaccurate and the X-Y contour compensation value needs to be adjusted by -0.05 to -0.1. A test file is included, and it is recommended to print it first.
-------------
Print Settings
Layer height:0.2mm
speed:200mm/s
Need support
5% infill , 3 walls
Print Time : ~9 hours
The leg joints are printed as a single piece, with a 0.2 mm gap reserved for movement. If the joints cannot move, it means the dimensions are inaccurate and the X-Y contour compensation value needs to be adjusted by -0.05 to -0.1. A test file is included, and it is recommended to print it first.
-------------
Print Settings
Layer height:0.2mm
speed:200mm/s
Need support
5% infill , 3 walls
Print Time : ~9 hours
Robot3dart también publica en
7 modelos adicionales en 1 plataformas más
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
