MakerWorld
2D Art
Voir le modèle
Joker HueForge
85
Téléchargements
50
Likes
31
Makes
ModelDo NOT adjust the size in your slicer!! The layers will not come out right.Do not change the size, this will cause errors in color change compromising the entire print.Use my print profile or you will not get the desired results.It can be printed safely without AMS and on any printer.I hope you like it, I hope you like it, if you want to support me leave a like and vote five stars thank you! Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Nozzle: 0.4 Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5Swap Instructions: Start with Charcoal At layer #7 (0.64mm) swap to Gray At layer #11 (0.96mm) swap to Jade White for the rest.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
