Joker - Hueforge

by Jans120 · Hueforge & Lithophane

95 Downloads

71 Likes

46 Makes

Project: joker.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 141.67x170mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.8mmFilaments Used: PLA Black Transmission Distance: 0.3 PLA Purple Transmission Distance: 4.5 PLA White Transmission Distance: 6This print uses 3 unique filaments!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Purple At layer #13 (1.12mm) swap to White for the rest.