Joker Lithophane Portrait

A detailed multi-material lithophane-style portrait of the Joker. This model features color changes to create a striking visual effect with black, white, and red filaments. Model Specifications: Dimensions: 173.54 x 200mm Total Thickness: 2.02mm Base Thickness: 0.5mm Print Settings: Infill: 100% Layer Height: 0.08mm Base Layer: 0.1mm Note: You may print at higher layer heights below the Base Thickness of 0.5mm Filament Requirements: This print uses 3 different filaments: Black PETG - Base layer (Transmission Distance: 0.3mm) White PLA - Middle section (Transmission Distance: 5mm) Red PLA - Accent details (Transmission Distance: 2.5mm) ⚠️ WARNING: This model uses mixed filament types (PETG and PLA). Please ensure this is intentional before printing. Color Change Instructions: Start with Black filament Layer #7 (0.58mm) → Swap to White Layer #14 (1.14mm) → Swap to Black Layer #15 (1.22mm) → Swap to Red (continue to end) Estimated Print Time: ~3 hours 15 minutes Recommendations: Ensure good bed adhesion for the first layer Calibrate your printer for optimal color change results Clean nozzle thoroughly between color swaps Consider using a purge tower or wipe pattern Enjoy your print! 🎨