Joker (NO AMS/CFS)

You can print it even without a multicolor printer, adding a pause every color change. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 101.25x180mm in size  You may print at higher layer heights below the Min Depth of 0.24mm  The Max Depth is 4mm and the Actual Depth is 2mm Filaments Used:  PLA Creality Hyper Black Transmission Distance: 0.1  PLA+ Sunlu Grey Transmission Distance: 1.5  PLA Creality Hyper Red Transmission Distance: 3.6  PLA Creality Hyper Skin Transmission Distance: 5.4  PLA Creality Hyper White Transmission Distance: 9.1 This print uses 5 unique filaments Swap Instructions:  Start with Black  At layer #3 (0.32mm) swap to Grey  At layer #5 (0.48mm) swap to Red  At layer #12 (1.04mm) swap to Skin  At layer #16 (1.36mm) swap to White for the rest.