Jolteon - HueForge

Just a fun Jolteon I came up with. Prints great, and is perfect for any Pokemon fan, especially fans of Eevolutions and Jolteon. I use the frame made by SGandalf (https://makerworld.com/en/models/503437?from=search#profileId-418903), and it displays my prints very well. Just use the HueForge settings in Bambu Slicer. I used PLA Yellow and PLA Black.I hope you enjoy it. :)Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.6mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA Hatchbox Yellow Transmission Distance: 3This print uses 2 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Yellow for the rest.