Thingiverse
Joycon Grip with Front-Looking LED Windows
par ecoiras
108
Téléchargements
93
Likes
1
Makes
This is a remix of [my remix](https://www.thingiverse.com/thing:4240823) of [Switch Joy-Con Grip](https://www.thingiverse.com/thing:4010954) by [Philippzzt](https://www.thingiverse.com/Philippzzt).
It prints without supports and the LED windows face forward, so you can see them right as you normally hold the joycon. The LEDs shine into a slit that arrives to a 45º oriented surface which can be seen from the front-looking window. It is basically a cheap mirror arrangement. But it works!
Most PLA filaments are reflective enough for this trick to work. Even black PLA works well, as shown on the photos. PETG should be fine too, although I haven't tried it myself.
In any case, if you are not sure if your particular filament of choice will be shiny enough, print first the test STL model, which is just the little window part. Try it with your joycon and if the LEDs reflect well you can go ahead and print the full model.
Have Fun!
It prints without supports and the LED windows face forward, so you can see them right as you normally hold the joycon. The LEDs shine into a slit that arrives to a 45º oriented surface which can be seen from the front-looking window. It is basically a cheap mirror arrangement. But it works!
Most PLA filaments are reflective enough for this trick to work. Even black PLA works well, as shown on the photos. PETG should be fine too, although I haven't tried it myself.
In any case, if you are not sure if your particular filament of choice will be shiny enough, print first the test STL model, which is just the little window part. Try it with your joycon and if the LEDs reflect well you can go ahead and print the full model.
Have Fun!
ecoiras publie également sur
21 modèles supplémentaires sur 2 autres plateformes
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
