Joycon Grips

I've been unable to find a grip that I'm completely satisfied with so after buying a printer I decided to try making my own XL detachable joycon.

These are made to thread into the back of the joycons for a secure fit. The stock joycon screws are too short so you will need to find some different screws for this to work. I believe the stock screws are 1.4mmx6mm. I haven't got the proper screws myself, I'm using some 2mm hex screws out of a kit that I bought recently which I wouldn't recommend as they are likely split or snap the screw posts on the joycon shell but it is possible to make them work if you're in a pinch. Whatever screws you use I would recommend making sure that the counter sunk holes of the grips are larger than the screw head you're using so you dont strip threads trying to get them in there. I edited these before submitting and increased the counter sink holes to 4mm so shouldn't be too much of an issue now.

For now there are just three screw holes since I was worr