JoyOfCoffe HueForge

AI image - source community public gallery.Then used HueForge v0.8.1 to create the model.Size 150x200mm. Do NOT adjust the thickness (Z) in your slicer! The layers will not come out right. You CAN adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness.Nozzle: 0.4Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.You may print at higher layer heights below the Min Depth of 0.48mm. The Max Depth is 2.1mm and the Actual Depth is 2.1mmThese were my settings and colors for my print that you see in the picture. Your results may be depending on the filament you use.Filaments Used: PLA Elegoo + Black Transmission Distance: 0.3 PLA Bambulab Basic Brown Transmission Distance: 2 PLA Sunlu META Grey Transmission Distance: 3 PLA Elegoo+ White Transmission Distance: 8.9 Swap Instructions: Start with Black At layer #13 (1.12mm) swap to Brown At layer #14 (1.2mm) swap to Grey At layer #15 (1.28mm) swap to White for the rest.Please shar