Thingiverse
JT ER2 Horizontal Fixed Feed
por cedwards
16
Descargas
19
Likes
0
Makes
Horizontal fixed feed tube for JT ER2 paintball gun
- Use the feedneck cutter template to saw off the stock feed tube at an angle and drill a mounting hole (3/16" drill bit).
- Print the thing. Try at a 45 degree angle with raft and supports. (see picture for reference)
- The feed is designed to use a sock-lock feedgate
- the front of the feed snaps into the hole you drilled on the feedneck, and you need a bolt and nut to attach the rear to the gun's beavertail
- Use the feedneck cutter template to saw off the stock feed tube at an angle and drill a mounting hole (3/16" drill bit).
- Print the thing. Try at a 45 degree angle with raft and supports. (see picture for reference)
- The feed is designed to use a sock-lock feedgate
- the front of the feed snaps into the hole you drilled on the feedneck, and you need a bolt and nut to attach the rear to the gun's beavertail
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
