Slicer Discord
Jumping frog – 3D printable model from MakerWorld MakerWorld
Animals

Jumping frog

1.3k Downloads
392 Likes
390 Makes
Go to Model
The jumping frogFrogs are cool and making a 3D printable version that is able to jump was a fun project, so here you go. The back legs have 3 joints just like a real frog and can store up a fair bit of energy. The center spring is not necessary, but will increase the stability and jump distance of the frog. Press down on the ”bottom” of the frog will dragging your finger off it and it will JUMP! Up to 1.2m/4 feet in total distance traveled, Its also kinda cute I guess. Easy to print and assemble, for best results use 8mm or less layer height with no supports. Both an AMS and nonAMS version is available for coloring the eyes. Printables:1x FrogMainBody or FrogMainBodyNoAMS2x back-leg (1 mirrored) 2x front-leg (1 mirrored)2x front-foot-bottom (1 mirrored)1x center spring (not necessary)2x frog-eye if NoAMSAssembly:1. Slot in the back legs in their appropriate slots, make sure they face the correct way. It should make a small “click”, you might have to press a bit 2. Slot in the front leg
Category
Animals
Source
MakerWorld
Published
Updated
What you need to print this: Beginner Medium confidence
Why?
no supports · 2 colors
Support-free Single piece 2 colors / AMS
Supports 0/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
Colors
2 (AMS/MMU recommended)
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection