Jupiter Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 220x207.48mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.5mmFilaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA Kingroon Orange Transmission Distance: 4.6PLA Kingroon White Transmission Distance: 4.7This print uses 3 unique filamentsSwap Instructions:Start with BlackAt layer #10 (0.88mm) swap to OrangeAt layer #15 (1.28mm) swap to White for the rest.