Just Earth HueForge

Source generated image.Then used HueForge v0.8.0 to create the model.Size 200x200mm. Do NOT adjust the thickness (Z) in your slicer! The layers will not come out right. You CAN adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness.Nozzle: 0.4You may print at higher layer heights below the Min Depth of 0.56mm. The Max Depth is 2.2mm and the Actual Depth is 2.2mm These were my settings and colors for my print that you see in the picture. Your results may be depending on the filament you use.Filaments Used: PLA Elegoo+ Black Transmission Distance: 0.3 PLA Devil Design Navy Blue Transmission Distance: 1.6 PLA Sunlu Matte Blue Transmission Distance: 4.5 PLA Elegoo+ Gray Transmission Distance: 5.6 PLA Elegoo+ White Transmission Distance: 8.9This print uses 5 unique filaments Swap Instructions:Start with Black At layer #7 (0.64mm) swap to Navy Blue At layer #15 (1.28mm) swap to Blue At layer #17 (1.44mm) swap to Gray At layer #20 (1.68mm) swap to White