JZ-TS35 Case

Case for touch panel JZ-TS35, useful for closed 3D Printers as it can be attached at the Botton on a 45º angle. It uses a cooler on the back side which specs are: 40x40x20mm, connected directly on the main power source (12v). Screws at the front are (4x) M3x4mm. Screws for the cooler are (4x) M3x5mm. Screws for fixing at the printer are (4x) M3x4mm. The case has enough space for the WiFi module, as well, and a side hole to fit the antenna when it is installed.