Slicer Discord
K-9 - MMU – Modelo 3D imprimible de MakerWorld MakerWorld
Characters

K-9 - MMU

641 Descargas
699 Likes
45 Makes
Ver Modelo
MMU version of K-9K-9 is Marvin the Martian's pet alien dog, from Warner Bros.' Looney Tunes and Merrie Melodies cartoons.The model, as presented is 115mm tall.This MMU model was derived from my non-MMU model (reworked for a clean MMU print, ears and broom were slightly changed).Enjoy!Print instructionsImportant: I used seven colors for this printI've included a Prusa Slicer 3MF file that I used for this print. To get the seven colors:after the eyes finish and before the broom starts (I put a pause at the 96.4mm layer)swap in the yellow for the white that is no longer neededswap in the gold/brown for the red that is no longer neededFor filament swaps using the MMU3, at the pause I loosen the two pressure screws on the MMU3 unit. Opening the top allows for a manual filament load. I pull out the old filament, and manually feed the new filament to the opening. I then simply guide it into the second opening where it is now in position to be picked up when next needed. Resume fr
Categoría
Characters
Fuente
MakerWorld
Publicado
Actualizado
Lo que necesitas para imprimir: Intermedio Confianza media
¿Por qué?
2 colores · capas de 0.40mm
Pieza única 2 colores / AMS Tornillería requerida
Soportes 1/3
Ensamblaje 0/3
Ajustes 1/3
Tamaño de cama 0/3
Postproceso 1/3
Impresora
FDM / FFF
Formato de archivo
STL
Material
Colores
2 (AMS/MMU recomendado)
Altura de capa
0.4 mm
Postprocesado
Tornillería
Software
Cura, PrusaSlicer o similar
Mismo diseñador, más plataformas

reddadsteve también publica en

844 modelos adicionales en 5 plataformas más

Verificado por coincidencia de títulos de modelos entre plataformas.
Aún no hay valoraciones
Aún no hay comentarios – ¡sé el primero!

Modelos similares

6 Sugerencias
Feed Blog Slicer Calculadora Búsqueda por imagen Enviar Contacto Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Añadir a colección