K2 D3P riser -Quad Space Pi shelf extension

CHANGELOG2025-10-15 Modified the model to have the triangular bracket filed and tightened tolerances.MODELThis is a shelf extension for use with the K2 D3P riser. The shelf extension allows adding the Quad Space Pi filament dryer beside the CFS unit at the top of the riser.Two models are provided, one for the right side and one for the left side.Click here to find out more about the D3P riser system for the K2 :K2 D3P Riser3D PRINTINGPRINT SETTINGSIMPORTANT: After verification with Creality it appears that there are some issues that need to be resolved with the mobile printing app. At present it seems these may affect slicing and printing of the model. After verification, it was suggested by the Creality Cloud team to use the desktop slicing and printing software. Thank you for your understanding.IMPORTANT I upload a print setting files for all my models. The print settings has the parts positioned for correct printing.I strongly recommended you use my print setting file. If not, I will not be able to assist you if there is an issue when printing. From experience, many of the issues with printing my models are on account of users not using my print settings.3D PRINT SETTINGSI use the following settings and materials to print this model:Infill % : 15% (no need for more)Nozzle diameter: 0.4 mmLayer height: 0.2 mm standardMaterial: PLA is recommended as its more rigid. PETG or other filaments may cause the part to deform or may not work with the built-in tolerances. PLA-CF and PETG CF and other materials often print too wide and cause parts not to fit.