K9

This is not a ready to print design, but I got so much good response on this project that I decided to put it up anyway.
You need to mirror some parts of the head in your slicer to get both sides.

(I still have to find and upload some of the parts)

Aditional parts:

49x [WS2812B-LED-With-Heatsink](http://nl.aliexpress.com/store/product/100x-WS2812B-LED-With-Heatsink-10mm-3mm-DC5V-5050-SMD-RGB-WS2811-IC-Built-in/1248101_32378187271.html) (30 for eyes,10 display, 9 under switches)
2x 608ZZ 8x22x7mm bearing
1x Arduino
1x df-player + sd-card
1x digital amplifier
2x speaker 3 watt 4 ohm (4cm diameter)
1x 10000mah powerbank
2x micro servo (ears)
1x Metal geared servo (neck)
9x 6x6 mm switch
10x 820 ohm resistor
3x Swifel wheels (20cm)
1x m8 rod (inside neck)


+Nuts, bolts, nails, wood, wire & glue

Sourcecode: https://github.com/MennoLauwerens/K9

Leave me a message when you want to know more.