Kahl Axe

Loosely based on the LoV Kahl Axe, I designed this prop for the GN in 2025. I used a 1.5" PVC Pipe for the handle and wrapped it in faux leather. The battery bank can be inserted into the axe body. I installed the LEDs in the Pickaxe head, then ran the wires into the top. There is a push-button switch on the inside to turn the lights on and off. The lights would run for over 12 hours on a single charge. The blades are thin and fragile to allow light to pass through them. You will need to print of the three body pieces so that the threads can be aligned. The magnets are not required, but they help a lot.