kaiju 8 Framed hueforge

Would love to see your prints! Boost MeEvery boost helps me create more hueforges and give back to the community! :) Project: Kaiju 8 pose. vers. 2.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 141.22x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.72mmThe Max allowed Thickness is 2.64mm and the Actual Thickness is 1.92mmFilaments Used: #080a0d PLA BambuLab Matte Charcoal Transmission Distance: 0.3 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #8c9099 PLA BambuLab Basic Grey Transmission Distance: 1 #ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5 #56b7e6 PLA BambuLab Matte Sky Blue Transmission Distance: 1.3 #de4343 PLA BambuLab Matte Scarlet Red Transmission Distance: 2This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to Blue Gray At layer #12 (1.04mm) swap to Grey At layer #16 (1.36mm) swap to Ivory White At layer #20 (1.68m