KAIJU 8 HUEFORGE

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 116.71x185.99mm in sizeYou may print at higher layer heights below the Min Depth of 0.64mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Green Transmission Distance: 2 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #16 (1.36mm) swap to Blue Gray At layer #19 (1.6mm) swap to Green At layer #21 (1.76mm) swap to GrayBorder Only Colors from here until the end. At layer #26 (2.16mm) swap to Jade White for the rest. paint some parts with acrylic marker.