Kakashi HueForge

Do NOT adjust the size in your slicer!! The layers will not come out right.Do not change the size, this will cause errors in color change compromising the entire print.Use my print profile or you will not get the desired results.It can be printed safely without AMS and on any printer.I hope you like it, I hope you like it, if you want to support me leave a like and vote five stars thank you! The Model is 93.14x180mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.7mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.1 PLA BambuLab Basic Silver Transmission Distance: 0.7 PLA BambuLab Matte Ivory White Transmission Distance: 1.7 PLA BambuLab Matte Scarlet Red Transmission Distance: 1.8This print uses 4 unique filamentsSwap Instructions: Start with Charcoal At layer #7 (0.64mm) swap to Silver At layer #9 (0.8mm) swap to Ivory White At layer #12 (1.04mm) swap to Charcoal At layer #15 (1.28mm) swap