Kakashi Hueforge

Kakashi Hueforge from a picture i found on internet. Credits for designer. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 137.34x245mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2mmFilaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Tough Cream White Transmission Distance: 10PLA Basico Control3D Red Transmission Distance: 4This print uses 3 unique filamentsSwap Instructions:Start with BlackAt layer #10 (0.88mm) swap to Cream WhiteAt layer #20 (1.68mm) swap to Red for the rest.