MakerWorld
Hueforge & Lithophane
Vai al Modello
Karate Kid
35
Download
28
Likes
19
Makes
Project: Karate Kid.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x236.8mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.3mmFilaments Used: PLA+ Sunlu Black Transmission Distance: 0.5 PLA+ Sunlu Red Transmission Distance: 1 PLA+ Sunlu Orange Transmission Distance: 2This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Red At layer #12 (1.04mm) swap to Orange for the rest.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!