Karateka Initial Play Screen Apple // version

Being a child of the late 70's and early 80's, I grew up around the 8 bit computers of the era, and was one of the lucky teenagers to have an Apple ][+ back in the day. Beagle Bros. Software, and Apple ][+ and //e machines were a big deal to many of us in that timeframe, and I decided to make a few HueForge prints to add to many others I've made. Enjoy! Unlike typical HueForge generated prints, these may be printed at standard print settings, although 100% infill is recommended. These models may be scaled along the X and Y axis, but do not scale the Z axis. Scaling these models up to a larger size will likely work better than scaling them down to a smaller size. They are scaled to a minimum bed size of 255x255, and going smaller would certainly work, although detail may suffer. This print requires a single color change from black to green at layer 5. As long as your printer allows you to pause, and change the filament in the slicer, an AMS/CFS/ACE Pro, etc are not required.