Thingiverse
Kasa_Camera_Mount
door jason_gnzls
15
Downloads
9
Likes
0
Makes
My attempt to create a holder for my Kasa E70 Pan and tilt camera. I used https://www.thingiverse.com/thing:5246194 by shizby as an idea starting point.
The camera fits with about 1-2mm of room to spare if your printer isn't 100% calibrated.
The walls and floor are about 4mm thick which could be brought down if you want to make the model a little smaller. The holder is very solid and holds the camera very well.
The screw holes are 4mm, which can also be made smaller to accommodate smaller screws.
I included the OBJ file for editing.
The camera fits with about 1-2mm of room to spare if your printer isn't 100% calibrated.
The walls and floor are about 4mm thick which could be brought down if you want to make the model a little smaller. The holder is very solid and holds the camera very well.
The screw holes are 4mm, which can also be made smaller to accommodate smaller screws.
I included the OBJ file for editing.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!