Keebio Iris v2.8 Case

This is a switch plate and angled base for the Keebio Iris Mechanical Keyboard, the version of the PCB I have is 2.8 where I believe the 2 inner thumb switches are 2.5 mm further away from the rest of the keys.

The switches used are Gateron Green (pretty heavy and loud) using DSA keycaps in a Dvorak layout. I am pretty new to mechanical keyboards and have just dived in and had a go and very new to Dvorak so this write up has taken about 15 mins to write.

I have changed the model slightly to raise the lip around the keycaps by 2 mm from the one shown in the photos as I feel the switches are a little exposed.

The left files only have been created as the right hand gcode files are a mirror of the left. There is a 10 degree angle on the base so the model will have to be rotated along the Y axis by this amount to get it to sit flat to the build plate.

There is enough space for the pro micros to be de-mountable as this allows the boards to be changed easily if they fail.