Keep / Small castle 28mm scale

This one took me a little while with my limited time. Wasn't going to post till I was sure all files were good, printed and painted. All holes in this design used as hinges or retainers are sized for 16 gauge tie wire.
So, what I needed was a small keep with a few tricks for a final showdown with a particular reoccurring villain. So, what this keep's got is two buildings 3 stories high (including the roof tops). I fashioned a suspended bridge that I printed in flexible TPU where every two boards = 1 square), and have included a solid stone bridge in cause flexible you don't have flexible material available.
The first building (A) contains 3 floors. The keep entrance with arrow slit windows, a second floor with access to the bridge and a ladder to the trap door to the roof.
The second building (B) contains 3 floors. The dungeon level with limited and barred windows and manacles on the walls, the second floor with balcony, and the roof with stair access to the second floor an