Kefla Hueforge

If you would like to thank me or support me with a one-time donation, or if you are interested in selling physical prints of my models, check out: https://buymeacoffee.com/heyben Kefla Hueforge Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 1.1mmThe Max Depth is 3.3mm and the Actual Depth is 3.2mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.1 PLA BambuLab Basic Jade White Transmission Distance: 5.7 PLA BambuLab Basic Maroon Red Transmission Distance: 1.3 PLA PolyLite Cream Transmission Distance: 2.7 PLA PolyLite Polymaker Teal Transmission Distance: 0.8 PLA BambuLab Basic Mistletoe Green Transmission Distance: 0.6 PLA BambuLab Basic BambuLab Green Transmission Distance: 2.6 PLA BambuLab Basic Bright Green Transmission Distance: 4This print uses 8 unique filaments ***attached .3mf file prints the first 5 layers at 0.2mm then the rest at 0.04mm f