Thingiverse
Kerfmaker
von ccrumpacker
2.3k
Downloads
1k
Likes
16
Makes
Based on a few different designs I've seen floating around including the commercially available one from [Bay City Tools](http://www.bridgecitytools.com/default/featured/km-1-kerfmaker.html)
I printed this at 30% infill and 3 exterior walls and used PLA to avoid the warping since the ends needed to be very square.
Hardware needed:
2qty. M4x20mm hex cap bolts [Lowes](http://www.lowes.com/pd_138166-37672-880640___)
2qty. M4 nuts. [Lowes](http://www.lowes.com/pd_138233-37672-880794_0__)
The set up to cut those two very different sized lap joints pictured above took just seconds and there are no gaps.
Here is a very simple step by step on how to use it for some half lap joints. https://stusshed.com/tag/km-1/
And here is a video turorial https://www.youtube.com/watch?v=PQ6_S6lZKLI
EDIT: Added the 123D Design files too incase anyone wants to monkey with the design. Just be sure to "remix" it from mine.
EDIT: I've just completed the Tenonmaker as well, [Thing:1354302](
I printed this at 30% infill and 3 exterior walls and used PLA to avoid the warping since the ends needed to be very square.
Hardware needed:
2qty. M4x20mm hex cap bolts [Lowes](http://www.lowes.com/pd_138166-37672-880640___)
2qty. M4 nuts. [Lowes](http://www.lowes.com/pd_138233-37672-880794_0__)
The set up to cut those two very different sized lap joints pictured above took just seconds and there are no gaps.
Here is a very simple step by step on how to use it for some half lap joints. https://stusshed.com/tag/km-1/
And here is a video turorial https://www.youtube.com/watch?v=PQ6_S6lZKLI
EDIT: Added the 123D Design files too incase anyone wants to monkey with the design. Just be sure to "remix" it from mine.
EDIT: I've just completed the Tenonmaker as well, [Thing:1354302](
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!