Thingiverse
Key Condenser
von bcDesigns
45
Downloads
42
Likes
0
Makes
Printing Instructions & Parts List:
Small plates with space for [M3 nuts](https://www.amazon.com/Screws-Bolt-Assortment-Stainless-Steel/dp/B07FMCXGMY/ref=as_sl_pc_tf_til?tag=bcdesigns09-20&linkCode=w00&linkId=87f99c1d8c7d2c6e6355b941c59680cd&creativeASIN=B07FMCXGMY) with holes tappable by [M3 screws](https://www.amazon.com/Screws-Bolt-Assortment-Stainless-Steel/dp/B07FMCXGMY/ref=as_sl_pc_tf_til?tag=bcdesigns09-20&linkCode=w00&linkId=87f99c1d8c7d2c6e6355b941c59680cd&creativeASIN=B07FMCXGMY) (Designed such that these 14mm screws will allow you to hold 4 keys). To setup in your slicer, you will need to duplicate the part and mirror it about the X-axis. This will ensure that you have two opposite sides that can be screwed together. Also note that these should be short enough that you can print one object at a time on most printers, so if that is possible to arrange in your slicer it will likely result in a better quality print and less post processing. You will want to use 80-100% i
Small plates with space for [M3 nuts](https://www.amazon.com/Screws-Bolt-Assortment-Stainless-Steel/dp/B07FMCXGMY/ref=as_sl_pc_tf_til?tag=bcdesigns09-20&linkCode=w00&linkId=87f99c1d8c7d2c6e6355b941c59680cd&creativeASIN=B07FMCXGMY) with holes tappable by [M3 screws](https://www.amazon.com/Screws-Bolt-Assortment-Stainless-Steel/dp/B07FMCXGMY/ref=as_sl_pc_tf_til?tag=bcdesigns09-20&linkCode=w00&linkId=87f99c1d8c7d2c6e6355b941c59680cd&creativeASIN=B07FMCXGMY) (Designed such that these 14mm screws will allow you to hold 4 keys). To setup in your slicer, you will need to duplicate the part and mirror it about the X-axis. This will ensure that you have two opposite sides that can be screwed together. Also note that these should be short enough that you can print one object at a time on most printers, so if that is possible to arrange in your slicer it will likely result in a better quality print and less post processing. You will want to use 80-100% i
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!