Keycap Catapult V1

This is a keycap that is fit with a catapult with objects to fire with. This was designed using Onshape and printed on a Bambu Labs A1 Mini with blue PLA filament. Your results may vary from mine. This is great for curing boredom while you work. If you would like to see a target to aim at, please comment down below. The keycap takes up 3 spaces, I recommend using the right function, alt, and one other key. This was tested on a Keychron K2 V2 keyboard. Please note that the pictures on the cover show the rubber band only on one of the holes. Please insert it into both holes, refer to the last picture (picture with a pen holding the catapult). Assembly:After printing the model, take out all of the supports. I recommend using a blade to get rid of the supports.Get a small rubber band (make sure it can at least stretch across the keycap).Thread the rubber band through the lower hole and the upper hole. You may have to use some force to put it in.Using the pole, connect the arm and the keyca