Keychain — 3D printable CS2 team logo

This package contains an STL model of the [TOP 10 HLTV] keychain logo optimized for FDM 3D printing. The model is sized for everyday use (≈45–60 mm across depending on the logo) with a reinforced keyring hole and a flat backside for easy post-processing. Suggested final print size: ~45–60 mm (adjust in your slicer). Recommended print settings: Layer height: 0.16–0.24 mm Wall/shells: 2–3 perimeters Infill: 10–20% (increase to 25–30% for thin/delicate logos) Print speed: 40–60 mm/s Material: PLA (recommended) — PETG if you need extra toughness Supports: usually none required; enable supports for complex cutouts or overhangs Brim: recommended for small contact area parts to avoid liftingMulti-color tips: to print with two colors, pause the print at the layer where color changes occur or slice as separate parts and glue together.Post-processing: light sanding, primer, and acrylic paint for a polished look. Use superglue to attach keyrings.License & use: This file is intended for personal u