Thingiverse
Keychain Cup Container
par make_snail
19
Téléchargements
79
Likes
0
Makes
Here's a small toy Stanley tumbler with a screw-on lid that's large enough to hold a standard sized stick of lip balm. You can attach it by its handle to a keychain.
This was my first attempt at designing threaded parts in FreeCAD.
There are other similar designs out there, but I tried to make this one printable without supports for the cup body and regular (no straw) lid. If you print the regular lid upside down, you might get away without needing supports for it (works on my A1mini). The cup itself can be printed right side up without supports.
The LID WITH STRAW _WILL_ need supports -- recommend using tree supports, on build plate only, printed right side up.
STL, STEP, and FreeCAD (v1.0) files are all made available for remixes or modification to your liking.
This was my first attempt at designing threaded parts in FreeCAD.
There are other similar designs out there, but I tried to make this one printable without supports for the cup body and regular (no straw) lid. If you print the regular lid upside down, you might get away without needing supports for it (works on my A1mini). The cup itself can be printed right side up without supports.
The LID WITH STRAW _WILL_ need supports -- recommend using tree supports, on build plate only, printed right side up.
STL, STEP, and FreeCAD (v1.0) files are all made available for remixes or modification to your liking.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
