Slicer Discord
Keychain salt shaker – Modèle 3D imprimable de MakerWorld MakerWorld
Other House Models

Keychain salt shaker

197 Téléchargements
74 Likes
23 Makes
Voir le modèle
There are 4 different sizes supplied. These refer to the inner diameter of the salt shaker. The one i printed is 10mm. If you also want to change other parameters, like length of the salt shaker, refer to the CAD model section. Printing To each size there is also a .3mf with the correct orientation of each model. If you are printing them separately just make sure the salt shaker is holes facing down. I printed the model in PLA, i haven't extensively test it. PETG will probably last longer. Usage Insert a key ring into the hole on the cap, that is the top. The other cap is for refilling the salt shaker. Make sure you are refilling it with the top cap on. Using a funnel to refill it makes it easier. CAD model file The most important parameters are: diameter: inner diameter of the salt shaker height: height of salt shaker All the parameters have description in the onshape document, in case you need them.
Catégorie
Other House Models
Source
MakerWorld
Publié
Mis à jour
Ce qu'il faut pour imprimer: Débutant Confiance faible
Monobloc
Supports 1/3
Assemblage 0/3
Réglages 1/3
Taille du plateau 0/3
Post-traitement 0/3
Imprimante
FDM / FFF
Format de fichier
STL
Matériau
PLA, PETG
Plateau min.
50 mm (Petit)
Logiciel
Cura, PrusaSlicer ou similaire
Même créateur, plus de plateformes

Adam publie également sur

629 modèles supplémentaires sur 4 autres plateformes

Vérifié par correspondance des titres de modèles entre plateformes.
Pas encore d'évaluations
Pas encore de commentaires – soyez le premier !

Modèles similaires

6 Suggestions
Feed Blog Slicer Calculateur Recherche par image Soumettre Contact Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Ajouter à la collection