Thingiverse
Keychain zodiac
par QuadroSky
38
Téléchargements
48
Likes
0
Makes
A collection of trinkets with zodiac signs. The keychain consists of two halves and a rim. I recommend printing in 2 colors. For example, one half begins in black and after printing 11 layers, as soon as the nozzle goes to 12 layers, change the plastic to white. The other side is the other way around. The rim can be printed in third color. Next, put half on a flat surface with the pattern down, install the rim, glue the surface of one of the halves with glue and, aligning the holes, apply the other half and glue. The rim should rotate freely. Before gluing, check whether the rim rotates. If not, retype the rim by changing the horizontal expansion option of the layer. For better cleaning of the nozzle from a different color, I recommend using a cleaner. She is of two kinds. To switch from dark to light and vice versa.
Print Settings:
0.2mm nozzle
Layer Height 0.1mm
Line Width 0.2mm
The number of wall lines 6
The number of layers of the bottom and cover 10
Print Settings:
0.2mm nozzle
Layer Height 0.1mm
Line Width 0.2mm
The number of wall lines 6
The number of layers of the bottom and cover 10
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
