Thingiverse
Keychron K2 Stands Set Flat
von BlackMothWeeping
0
Downloads
1
Likes
0
Makes
A Keychron K2 Stands Set for those who want a more sleek look, better sound or just experiment. For all those with a printer to small for the full plate or those who want a more minimalsitic look.
This might work for other boards aswell, but it was designed for the K2 and it is the only one tested.
It lays the board very flat, because that is how I like it. Stable for typing but recommended to add rubbery substance on the feet so they don't slip on flat surfaces unless you use a pad or mat.
BATTERY MUST BE REMOVED FOR THIS MOD!
Arrows on the bottom to indicate where the slant is. The arrows must point towards the person typing for it to stand flat.
OEM screws were used for best result.
Low stands have a smaller base to not interfere with the soldering spots on the board.
This might work for other boards aswell, but it was designed for the K2 and it is the only one tested.
It lays the board very flat, because that is how I like it. Stable for typing but recommended to add rubbery substance on the feet so they don't slip on flat surfaces unless you use a pad or mat.
BATTERY MUST BE REMOVED FOR THIS MOD!
Arrows on the bottom to indicate where the slant is. The arrows must point towards the person typing for it to stand flat.
OEM screws were used for best result.
Low stands have a smaller base to not interfere with the soldering spots on the board.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
