Khan Krum

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Grey Transmission Distance: 2 PLA+ Sunlu Orange Transmission Distance: 5 PLA+ Sunlu White Transmission Distance: 5Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Grey At layer #11 (0.96mm) swap to Orange At layer #14 (1.2mm) swap to White for the rest.Your last slider is set to 1.28mm which is lower than the model height.