Kid Gohan Hue Forge

Instructions Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 153.75x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.56mmThe Max Depth is 3mm and the Actual Depth is 2.8mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA PolyLite Black Transmission Distance: 0.3PLA BambuLab Basic Gray Transmission Distance: 2PLA BambuLab Basic Silver Transmission Distance: 0.5PLA BambuLab Basic Blue Transmission Distance: 4PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 6 unique filaments Swap Instructions:Start with BlackAt layer #12 (1.04mm) swap to BlackAt layer #13 (1.12mm) swap to GrayAt layer #20 (1.68mm) swap to SilverAt layer #21 (1.76mm) swap to BlueAt layer #22 (1.84mm) swap to BlueAt layer #24 (2mm) swap to BlueAt layer #27 (2.24mm) swap to Jade White for the rest. until max height