Kid Icarus NES Title Screen

HueForge image of the Kid Icarus title screen for the Nintendo Entertainment System (NES).HueForge NotesSingle AMS Instructions: Load Black, Magenta, Green, Grass GreenSet White to print in the Green slot and Gold to print in the Grass Green slotI have added a pause at layer 18 during which you should unload Green and resume printing. When the AMS complains that white filament is empty, load white into the Green slot and Gold in the Grass Green slot and resume printing for the rest of the image.Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x150mm in sizeYou may print at higher layer heights below the Base Thickness of 0.4mmThe Max allowed Thickness is 2.8mm and the Actual Thickness is 2.4mm Filaments Used: #000000 PLA Sunlu Black Transmission Distance: 0.3 #d83491 PLA+ Sunlu Magenta Transmission Distance: 3.3 #00c64f PLA+ Sunlu Green Transmission Distance: 2.1 #00818a PLA Sunlu Grass Green Transmission Distance: 1.8 #ffffff PLA BambuLab