Thingiverse
Kill Switch Tether
door Gravityisnotmyfriend
5
Downloads
3
Likes
0
Makes
This is the magnet holder for a motorcycle kill switch. I lost mine at a competition and had to borrow a friend's for the day.
There are 2 designs. One you can print and super glue a magnet in. The other you'll need to pause the print at about 9mm (depending on your layer height), drop the magnet in, and continue printing. Might be a good idea to add a drop of super glue first. I didn't have an issue, but the magnet could jump to your print nozzle/head if you don't.
The magnets I used are 8mm in diameter and 3mm thick.
I printed mine in both ABS and TPU. I'd think almost any material would be fine.
There are 2 designs. One you can print and super glue a magnet in. The other you'll need to pause the print at about 9mm (depending on your layer height), drop the magnet in, and continue printing. Might be a good idea to add a drop of super glue first. I didn't have an issue, but the magnet could jump to your print nozzle/head if you don't.
The magnets I used are 8mm in diameter and 3mm thick.
I printed mine in both ABS and TPU. I'd think almost any material would be fine.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
