Killer Klowns from outer space

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 141.6x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.32mm and the Actual Thickness is 2mm Filaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #0206ed PLA 3DHOJOR BASIC BLUE BASIC Transmission Distance: 4.8 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #fffd07 PLA 3DHOJOR yellow Transmission Distance: 5.7 #e2dedb PLA PolyLite White Transmission Distance: 5 This print uses 6 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to BLUE BASIC At layer #9 (0.8mm) swap to Red At layer #13 (1.12mm) swap to Blue Gray At layer #14 (1.2mm) swap to yellow At layer #18 (1.52mm) swap to White for the rest. Boost Meif you like what you see send a boost! thanks!!