KILLER PIKACHU HueForge

***IF YOU CHANGE THE SIZE OF THE PRINT, ENSURE THAT YOU LOCK THE Z-AXIS AND DO NOT CHANGE IT! Doing so will completely mess up the print!*** Project: PIKA.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.8mmThe Max allowed Thickness is 2.56mm and the Actual Thickness is 2.56mmFilaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #11 (0.96mm) swap to Red At layer #18 (1.52mm) swap to Yellow At layer #27 (2.24mm) swap to Jade WhiteBorder Only Colors from here until the end. At layer #32 (2.64mm) swap to Black for the rest.